Jul 25

Time

Place of Publication New York
Date of Publication Vol.193, no.24 : June 24, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.194, no.1 : July 1, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.194, no.2 : July 8, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.194, no.3 : July 22, 2019
Publisher Time Inc.


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 1 : January 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 2 : February 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 3 : March 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 4 : April 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 5 : May 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 235, no. 6 : June 2019
Publisher National Geographic Society


National Geographic

Place of Publication Washington, D.C.
Date of Publication Vol. 236, no. 1 : July 2019
Publisher National Geographic Society

Jul 24

EEE Graduate Theses

Solar PV integrated hosting capacity analysis with Volt-VAr compensation / Anonas, Samuel David S. (LG 995 2018 E64 A56)

Modularized cell balancing circuit using chain structure switched capacitor and bi-directional buck-boost converter / Bonavente, Daryll P. (LG 995 2018 E64 B66)

Trajectory tracking for an autonomous passenger vehicle / Capati, Randel M. (LG 995 2018 E64 C37)

Effects of varying material properties on the vibro-acoustic and tonal quality of classical guitar / Lucas, Crisron Rudolf G. (LG 995 2018 E64 L83)

Effects of bandlimited RF power amplifiers on LINC performance / Martin, Kevin M. (LG 995 2018 E64 M37)

Optimal energy schedule and incentive design for interruptible load contracts / Mercado, Miguel Alberto C. (LG 995 2018 E64 M47)

Data center heat distribution modeling using onboard sensors / Rubio, Jessi Christa R. (LG 995 2018 E64 R83)

Optimal oversampling using probabilistic error modeling in low-power digital energy detection receivers / Santos, Christopher G. (LG 995 2018 E64 S25)

Distribution system state estimator using SCADA and μPMU measurements / Santos, Ren Zedec S. (LG 995 2018 E64 S26)

Dynamic spectrum access protocol for community cellular networks / Vidal, Adrian R. (LG 995 2018 E64 V53)

Development of residential interruption offer curves for the interruptible load program / Yap, Christian Angelo (LG 995 2018 E64 Y37)

Investigation of the photonic time stretch for frequency agility in communication systems / Selerio, Fatima B. (LG 995 2019 E64 S45 )

 

EEE Dissertations

Doppler tolerant modified P4 code (DTMP4 code) for pulse compression radar / De Jesus, Neon S. (LG 996 2018 E643 D45)

RT-CaCC : towards a cache-aware congestion control mechanism in wireless sensor networks / Alipio, Melchizedek I. (LG 996 2018 E64 A45)

An adaptive overcurrent relay coordination scheme for weakly meshed distribution networks with distributed generation / Pacis, Michael C. (LG 996 2019 E643 P33)

 

Environmental Engineering Graduate Theses

Optimization of operating parameters on the recovery of copper ions from vetiver grass [Chrysopogon zizanioides (L.) Roberty] biomass by leaching process / Aragua, Richelle A. (LG 995 2018 E653 A73)

Degradation of imidacloprid by fluidized-bed Fenton process / Battung, Elaine Joy T. (LG 995 2018 E653 B38)

Effects of varying pretreatment conditions on temperature-phased anaerobic co-digestion of sewage sludge and Chlorella vulgaris / Bondad, Cheassylynne B. (LG 995 2018 E653 B66)

Evaluation of the stream health condition of Nam Khan River in Laos using combined visual, hydrological and water quality assessment tools / Boupha, Kittisack (LG 995 2018 E653 B68)

Assessment and prediction of vehicular emissions in Commonwealth Avenue, Quezon City at various policy and technology scenarios using simple interactive model (SIM-air) / Caramoan, Ria M. (LG 995 2018 E653 C37)

Degradation of gaseous VOCs by advanced oxidation processes : UV-assisted ozonation and ultrasonication / Comia, Jose R. (LG 995 2018 E653 C66)

Carbon dots from polyurethane for pH and 4-nitrophenol sensing and selective detection of silver ion (Ag+) / Dela Cruz, Ma. Ivy S. (LG 995 2018 E653 D45)

Solvent-desorption and regeneration of neutral, basic and acidic activated alumina from desulfurization of dibenzothiophene sulfone / Feliciano, Reyson M. (LG 995 2018 E653 F45)

Isolation, characterization, and application of cellulose nanofibers derived from coconut husk fibers using chemical-ultrasonic process  / Fuentes, Enrile B.  (LG 995 2018 E653 F84)

Fate of bupropion and paroxetine in aerobic conventional and nitrifying activated sludge / Garcia, Vince Carlo C. (LG 995 2018 E653 G37)

Remote detection of placer deposits and iron-bearing minerals using the infrared spectrum for the identification of environmental monitoring sites in Benguet catchment / Isidro, Celso M. (LG 995 2018 E653 I85)

Total suspended solids (TSS) removal from mineral processing tailings using an anionic flocculant / Isidro, Donamae B. (LG 995 2018 E653 I853)

Adsorption, elution and stabilization of mercury from aqueous cyanide solutions and recyclability of the used Fe-MMT adsorbent materials / Lodo, Marjorie Jane (LG 995 2018 E653 L63)

Enhancing the thermal catalytic oxidation of toluene on Ce and Cu co-doped manganese oxide octahedral molecular sieve catalyst in a packed-bed reactor / Loreto, Fe Corazon B. (LG 995 2018 E653 L67)

Facile synthesis of nitrogen and fluorine doped 3-dimensional reduced graphene oxide electrode for the removal of copper ions by capacitive deionization / Mamaril, Gil Stefan S. (LG 995 2018 E653 M36)

Fixed-bed column adsorption of cationic and anionic azo dye by adlai hulls / Martin, Jean M. (LG 995 2018 E653 M37)

Forecasting of daily and next day’s particulate matter (PM2.5) concentration levels in Quezon City using models based on adaptive neuro fuzzy inference system (ANFIS) / Moreno, Imee E. (LG 995 2018 E653 M67)

Comparative analysis of carbon dots from bamboo, coconut and mahogany wood for copper (II) ion sensing / Muega, Sherwin C. (LG 995 2018 E653 M84)

A Z-scheme concept of V2O5 and boron doped G-C3N4 nanocomposite for the photodegration of diclofenac sodium / Oliveros, April N. (LG 995 2018 E653 O45)

Multi-functional, highly fluorescent carbon dots from enokitake mushroom (Flammulina velutipes) for metal ion sensing and imaging applications  / Pacquiao, Melvin R. (LG 995 2018 E653 P33)

Estimation of pollution load and assessment of water quality in San Cristobal river basin using geographic information system (GIS) / Pagdingalan, Rowena J. (LG 995 2018 E653 P34)

Photodegradation of acetaminophen and sulfamethoxazole by visible-light-responsive g-C3N4 based 2D photocatalysts / Paragas, Larah Kriselle B. (LG 995 2018 E653 P37)

Cartap removal through Fenton oxidation in a fluidized-bed reactor / Rabongue, Anamie (LG 995 2018 E653 R33)

Removal of copper (II) ions using 3D reduced graphene oxide-polyaniline-halloysite nanotube for capacitive deionization process / Saavedra, Ivy Theresa A. (LG 995 2018 E653 S23)

An adaptive neuro-fuzzy inference system (ANFIS) approach to waste mobile phone estimation in the Philippines / Saludes, Roxanne Z. (LG 995 2018 E653 S25)

CO2 capture and utilization by KOH absorption and CaCO3 granulation in the fluidized-bed reactor / Sioson, Arianne Sebron (LG 995 2018 E653 S56)

Utilization of granulated coal ash (GCA) for treatment of nutrient-rich wastewater and improvement of water quality / Tiria, John Andrew A. (LG 995 2018 E653 T57)

Evaluation of nutrient dynamics leading to eutrophication in a polluted urban river, Pasig River, Philippines / Beak, Sophy (LG 995 2018 E653 B43)

Modeling of nutrients along Bued River with point sources of pollution / Tolentino, Mark Anthony G. (LG 995 2018 E653 T65)

Ammonium-nitrogen removal from synthetic wastewater by electrodialysis / Pingul-Ong, Sheila Mae B. (LG 996 2019 E653 P56)

Characterization, analysis, and recommendations for minimization of microplastics in Makati City creeks / Lumongsod, Stephanie Lou R. (LG 995 2019 E653 L86)

Removal of COD, turbidity and color in domestic wastewater using batch and continuous electrocoagulation system / Pempeña, Claribelle L. (LG 995 2018 E653 P46)

Removal of imididacloprid pesticide by catalytic percarbonate oxidation in homogeneous-batch and heterogeneous-fluidized bed reactions : catalyst synthesis, kinetics, optimization, and transformation products / Sablas, Michael M. (LG 995 2018 E653 S235)

Electrochemical oxidation and dissolution of refractory (Benguet) gold concentrate in hypochlorite solutions / Regidor, Hanna Czarise E. (LG 995 2019 E68 R44)

 

Environmental Engineering Dissertations

Nutrient removal in aquaculture wastewater and recovery as microalgae (Chlorella vulgaris and Scenedesmus quadricauda) biomass in alginate-chitosan matrix / Castro, Marion Lux Y. (LG 996 2018 E653 C37)

Microwave and ultrasound-assisted transesterification of microalgae using homogenous and heterogeneous alkali catalyst / Cercado, Alberto Paulo I. (LG 996 2018 E653 C47)

Treatment of municipal wastewater using submerged membrane electro-bioreactor (SMEBR) for the control of membrane fouling and the removal of emerging contaminants / Ensano, Benny Marie B. (LG 996 2018 E653 E57)

Utilization of groundwater treatment sludge and sludge-derived manganese dioxide for the removal of nickel ions from aqueous solutions  / Ong, Dennis C. (LG 996 2018 E653 O54)

Recovery of rare-earth metals (yttrium and europium) from waste computer monitor backlight utilizing NaCL in the leaching process / Sapitan, Jhomee Fe F. (LG 996 2018 E653 S27)

Phytoremediation of mine tailings, heavy metal contaminated coco peat and nanofiber membrane from small scale gold mining using Pteris vittata and Pityrogramma calomelanos /Win, Zar Che (LG 996 2018 E653 W56)

 

Energy Engineering Graduate Theses

Techno-economic feasibility study of tidal power plant with seawater pumped storage in the Philippines / Ibanez, Roderaid T. (LG 995 2018 E65 I23)

Nickel hydroxide nanostructures as anode catalyst for direct ethanol fuel cells / Lidasan, Jun Jeffri B. (LG 995 2018 E65 L53)

Performance effects of tubercle leading edge (TLE) on a cambered airfoil profile for vertical axis wind turbines (VAWTs) in steady wind / Lositano, Ian Carlo M. (LG 995 2018 E65 L67)

Techno-economic assessment of offshore wind energy in the Philippines / Maandal, Gerard Lorenz D. (LG 995 2018 E65 M33)

VAWT cluster parameter study on overall cluster performance / Silva, Jeffrey E. (LG 995 2018 E65 S55)

Poly(oligoethylene glycol methacrylate)-based polymer electrolyte for dye sensitized solar cell application / Saladaga, Imee A. (LG 995 2018 E65 S25)

Facile synthesis of a CoFe2O4-dopes tin disulfide in reduced graphene oxide matrix as anode material for lithium ion batteries / Salvador, Ruben W. (LG 995 2018 E65 S258)

Techno-economic assessment of PV system in socialized residential low-rise buildings in Metro Manila / Techno-economic assessment of PV system in socialized residential low-rise buildings in Metro Manila (LG 995 2019 E65 B54)

Modelling the energy consumption of socialized residential low-rise buildings in Metro Manila / Chan, Maxine Y. (LG 995 2019 E65 C43)

Characterization of thorium- and uranium-bearing allanite mineral from Palawan – a natural analogue for high level nuclear waste storage / Manzano-Dingle, Cheri Anne D. (LG 995 2018 E65 M369)

Investigating the adsorption of oxygen species on halogen-substituted monovacant graphene via density functional theory calculation / Geronia, Reynaldo M. (LG 995 2018 E65 G47)

Life cycle health impact assessment of coal power plants in Luzon / Laguerta, Marvin T. (LG 995 2019 E65 L34)

High renewable energy (solar and wind) penetration hybrid energy systems in off-grid islands for deep decarbonization / Pascasio, Jethro Daniel A. (LG 995 2019 E65 P37)

Electrode combination selection for biodregradable primary batteries / Togonon, Jazer Jose H. (LG 995 2019 E65 T64)

 

Energy Engineering Dissertations

Improving the stability of diesel emulsions with high pyrolysis bio-oil content by alcohol co-surfactants and high shear mixing strategies / Cruz, Louis Angelo D (LG 995 2018 E65 C78)

Biomethane production from low-strength wastewater in an upflow anaerobic sludge blanket reactor : modelling methane production kinetics using sigmoidal growth functions and determining the effects of hydraulic retention time and reactor height on extracellular polymeric substances / Ebrada, Leni C. (LG 996 2018 E65 E27)

CFD modelling and experimental evaluation of a heat-driven ejector refrigeration system / Honra, Jaime P (LG 996 2018 E65 H66)

Reduced graphene oxide, MoS2 and graphene quantum dots for asymmetric supercapacitor application / Mamador, Charmyne B (LG 995 2018 E65 M36)

Numerical modelling of two-phase flow through an ejector for a novel modified single-flash geothermal power plant / Sohi, Hashemi (LG 996 2018 E65 H37)

 

MMM Undergraduate Theses

Photovoltaic and photocatalytic properties of bismuth oxyiodide-graphene nanocomposites / Mabuti, Levannie A. (LG 993.5 2018 M37 M33)

FA-CS-MELPH-C343 : synthesis, characterization and kinetics of a potential biocompatible, fluorescent and target specific anticancer prodrug / Raguindin, Ricky Kristan M. (LG 993.5 2018 M37 R34)

Extraction and purification of anthocyanin from Antidesma bunius for visible photocatalysis / Nonog, Ma. Eden Dorothy Q. (LG 993.5 2018 M37 N66)

 

MMM Graduate Theses

Optimization of the flotation circuit of a gold-pyrite processing plant by computer simulation / Tabell, Victor Oliver L. (LG 995 2018 E68 T33)

Particle growth from the reduction of gold (III) chloride using sodium metabisulfate and ascorbic acid / Verdijo, Michael Angelo O. (LG 995 2018 E68 V47)

Preparation and characterization of Ni/ScSZ as composite electrode material for solid oxide fuel cell and electrolysis cell applications / Garcia, Renz Marion G. (LG 995 2018 M37 G37)

Fabrication and characterization of nickel and yttria-stabilized zirconia composite electrode materials / Imperial, James Francis L. (LG 995 2018 M37 I47)

Fabrication of electrospun chitosan/poly(vinyl alcohol) nanofiber mats and effects of RF plasma treatment / Latag, Glenn V. (LG 995 2018 M37 L38)

Experimental and molecular dynamics studies of plasma-HDPE surface interactions  / Mella, Aubrey Faith M. (LG 995 2018 M37 M45)

Fabrication and characterization of electrospun cellulose-reinforced polycaprolactone nanofibrous membrane filled with Moringa oleifera leaf powder / Pagaduan, James Nicolas M. (LG 995 2018 M37 P34)

Utilization of Musa paradisiaca peduncle fiber in the fabrication of natural fiber-reinforced composite / Sapin, Gilberto N. (LG 995 2018 M37 S27)

Synthesis and characterization of yttria and scandia co-doped zirconia as solid electrolyte / Villanueva, Matthew Bryan P. (LG 995 2018 M37 V55)

Effect of electrostatic interactions in the separation of magnetite and silica in aqueous media using enhanced gravity concentration / Baladad, Karlo Leandro D. (LG 995 2018 E68 B35)

Defect-mediated runaway oxidation of electroplated tin / Fabro, Marie Angelynne C. (LG 995 2018 E68 F33)

Mechanism of gold (III) chloride cementation by zinc, iron and aluminum / Maniaul, Joy Marisol F. (LG 995 2018 E68 M36)

Electrophoretic measurement of zeta potential of needle-generated gas bubble in aqueous solutions in the presence of collectors / Pascual, Juan Inocencio M. (LG 995 2018 E68 P37)

Development of a low-energy ion source system for the deposition of diamond-like carbon thin films / Cuevas, Andrea Gracia T. (LG 995 2018 M37 C84)

Development of a cold atmospheric pressure plasma jet for surface treatment applications / De Leon, Mark Jeffry D. (LG 995 2018 M37 D45)

Fabrication parameters affecting the thermal conductivity of polymer-based thermal interface material / Razonado, Ivy Ann C. (LG 995 2018 M37 R39)

Microwave plasma activation and acrylic acid grafting of polytetrafluoroethylene surfaces for biomedical applications / Valerio, John Kenneth C. (LG 995 2018 M37 V35)

Effect of electrostatic interactions in the separation of magnetite and silica in aqueous media using enhanced gravity concentration / Baladad, Karlo Leandro D. (LG 995 2018 E68 B35)

Defect-mediated runaway oxidation of electroplated tin / Fabro, Marie Angelynne C. (LG 995 2018 E68 F33)

 

MMM Dissertation

Electrophoretic deposition (EPD) of Na-montmorillonite nanoclay from clay mineral slurries / Bernardo, Ivyleen C. (LG 996 2018 M37 B47)

Jul 10

 Department of Chemical Engineering Plant Design

Production of palm oil-based fatty acid methyl ester (FAME) : a plant design / Aligato, Albert Daniel E. (LG 993 2018 E62 A45)

Power generation from vinasse and press mud via anaerobic co-digestion : a plant design Dela Cruz, Alfonso Paolo F. (LG 993 2018 E62 D45)

Production of vinyl acetate monomer from acetic acid and ethylene over palladium acetate catalyst : a plant design / Lim, Isaiah Dale B. (LG 993 2018 E62 L56)

 

Department of Chemical Engineering Graduate Theses

Physical properties of neoprene based solvent adhesive blended with TAPE / Alfeche, Lalaine Joan V. (LG 995 2018 E62 A44)

Citrate-stabilized silver nanoparticles for copper (II) detection in hard water / Almaquer, Francis Eric P. (LG 995 2018 E62 A46)

Synthesis, characterization, and application of agar/alginate/k-carrageenan hydrogel blends for water retention in soil / De Chavez, Reynaldo C. (LG 995 2018 E62 D43)

Fabrication, characterization, and testing of activated carbon-nickel (II) oxide electrodes for capacitive deionization of aqueous sodium chloride solution / Gandionco, Karl Adrian (LG 995 2018 E62 G36)

Effect of replacing carbon black with surface-modified natural feldspar and silica clay on the curing characteristics and mechanical properties of natural rubber composites / Pinton, Noel Jeffrey P. (LG 995 2018 E62 P56)

Development of a thermodynamically-consistent alpha function for the Patel-Teja-Valderrama equation of state / Almajose, Allan Paolo L. (LG 995 2018 E62 A45)

Corrosion testing of selected metals exposed to commercial E10 gasoline via cyclic filling / Alcanzare, Myron T. (LG 995 2018 E62 A43)

Developing a gum arabic – citric acid bioadhesive for liquid bandage application / Ayapana, Chielo Marie N. (LG 995 2018 E62 A93)

Silver-doped titanium dioxide nanotubes for photoelectrocatalytic degradation of acid orange 52 / Lopez, Edgar Clyde R. (LG 995 2018 E62 L67)

Evaluation of the hydraulic gate structures in a diversion channel to minimize suspended sediment concentration during high flow conditions / Arquelada, Bonn Eric A. (LG 995 2018 E63 A77)

Effects of exterior precast walls on the static lateral behavior of reinforced concrete residential buildings in the Philippines / Calugay, Alfredo P. (LG 995 2019 E63 C35)

Portable electrochemical detection of bisphenol A and triclosan using CheapStat and screen-printed electrodes / Soriano, Ron Andrei E. (LG 995 2019 E62 S67)

 

Department of Chemical Engineering Dissertations

Development of hydrogel microparticles based on sodium alginate and cellulose derivatives for controlled delivery of bovine serum albumin / Guerrero, Rodel D. (LG 996 2018 E62 G84)

Selection of aptamer against Mycobacterium tuberculosis specific antigen — MTb CFP-10 for diagonostic applications / Reaño, Resmond L. (LG 996 2018 E62 R43)

Portable electrochemical detection of bisphenol A and triclosan using CheapStat and screen-printed electrodes / Jimenez, Koshneir Sarte (LG 995 2018 E63 J56 )

 

Department of Computer Science Graduate Theses

An algorithm for generating random graphs with prescribed degree sequence / Austria, Darrwin Dearest C. (LG 995 2018 C65 A97)

On string languages generated by spiking neural P systems with structural plasticity / De la Cruz, Ren Tristan A. (LG 995 2018 C65 D45)

Two dimensional ultradiscretization of the KPZ equation / Javellana, Lee (LG 995 2018 C65 J38)

Opportunistic named data networking improvements via load balancing / Lorenzo, John Bennedict T. (LG 995 2018 C65 L67)

Varying privacy budgets E for context-aware local differential privacy / Mendoza, Marie Jo-anne (LG 995 2018 C65 M46)

A three-choice minority game-based mechanism design for the utilization of a capacity-constrained resource / Montes, Catalina (LG 995 2018 C65 M66)

Stochastic dynamics of storm surge with stable noise / Rayo, Joshua Frankie (LG 995 2018 C65 R39)

Resilient sensor placement in water distribution networks using multiobjective evolutionary algorithms  / Tingzon, Isabelle B.  (LG 995 2018 C65 T56)

Evaluating the viability of ciphertext-policy attribute-based encryption on service-oriented health information exchange system / Felizmenio, Edgardo P. (LG 995 2018 C65 F45)

Sensor data correction in building automation systems using deep learning / Calimbahin, Caezarina Marie F. (LG 995 2019 C65 C35)

Modified greedy algorithm on game-theoretic traffic assignment / Rollan, Patrick G (LG 995 2018 C65 R65)

PRTNets : cold-start recommendation using pairwise ranking and transfer networks / Valerio, Dylan (LG 995 2018 C65 V35)

Investigation of the photonic time stretch for frequency agility in communication systems / Selerio, Fatima B. (LG 995 2019 E64 S45)

 

Department of Computer Science Dissertation

Construction of potential energy hypersurfaces through quantum chemical calculations : application to peptide structure prediction / Villar, John Justine S.(LG 996 2018 C65 V55)

 

Institute of Civil Engineering Undergraduate Theses

Water quality assessment and estimation of pollution sources in Sta. Rosa River, Laguna / Abad, Cesar G. (LG 993.5 2018 E63 A23)

Development of a protocol for fire testing of building fire exit components / Abucejo, Liza Mae Jane L. (LG 993.5 2018 E63 A28)

Impact of the Lacson flyover on the traffic along its adjacent road network / Aguilar, Phillip Eleazar S. (LG 993.5 2018 E63 A37)

Analysis on the free swell index of plastic soils in Metro Manila / Agustin, Aljohn T. (LG 993.5 2018 E63 A38)

Numerical simulation of the 1994 tsunami scenario along Calapan City, Mindoro coastline using the Delft3D model / Allan, Christian Paul D. G. (LG 993.5 2018 E63 A45)

Blast load analysis and simulation of concrete masonry walls : automation of pressure generation and response verification / Alvarez, Victoria M. (LG 993.5 2018 E63 A46)

Design of a rainwater harvesting system for the Institute of Civil Engineering Main Building : towards the development of a framework for academic buildings in UP Diliman / Amolato, Rochie D. (LG 993.5 2018 E63 A48)

Optimization of foundation design and construction / Andal, Maria Deandra C. (LG 993.5 2018 E63 A53)

Microplastic characterization and analysis in Tunasan River / Argota, Hannah Lou B. (LG 993.5 2018 E63 A74) 

Effects of different forms and proportions of plastic wastes as partial substitution of fine aggregates on the mechanical performance of concrete / Badiola, Ma. Lucila V. (LG 993.5 2018 E63 B33)

Study on students’ accessibility to the National Science and Engineering Complex in UP Diliman / Baluyot, Daniel E. (LG 993.5 2018 E63 B35)

Evaluation of turbulence models in predicting wind loads on ground-mounted solar panels / Bernales, Francis Jenner T. (LG 993.5 2018 E63 B47)

Stabilization of clayey soils using powdered marine shells / Biscocho, Ma. Michaela B. (LG 993.5 2018 E63 B57)

Characterization of Quezon City aquifer system using archydro groundwater module and risk assessment using susceptibility index method / Bronzi, Martha Elizabeth P. (LG 993.5 2018 E63 B7)

Local production, characterization, and performance of pozzolanic fly ash-based granulated coal ash (GCA) / Bugay, Sefina Glisa M. (LG 993.5 2018 E63 B84)

Assessment of commuters’ perception of jeepney transit service quality and the potential for an introduction of point-to-point e-tricycle transport service in UP Diliman / Cabatos, Lawdemhar T. (LG 993.5 2018 E63 C33)

Investigation of the hydraulics of flood flow downstream of the reservoir of Freeport Area of Bataan using HEC-RAS 2D / Caliguid, Paul Timothy D. (LG 993.5 2018 E63 C35)

Determination of the threshold value of chloride concentration of seawater utilized in the production of reinforced concrete (RC) specimens using gravimetric analysis / Canapi, Jezreel D. (LG 993.5 2018 E63 C36)

A study on the design, analysis and construction of precast wall panels in the Philippines / Canton, Romeo Julio L. (LG 993.5 2018 E63 C368)

Analysis of walkability along Taft Avenue / Capalar, Marie Antonette M. (LG 993.5 2018 E63 C37)

Experimental investigation of different failure modes of jalousie type window frames and determination of threshold capacity against static wind pressure / Carandang, Alvin A. (LG 993.5 2018 E63 C375)

Assessment and recommendation to improve route planning in the Philippines / Casilisilihan, John Mark P. (LG 993.5 2018 E63 C38)

The utilization of rice hull ash in hot mix asphalt / Chan, Mark Brandon Y. (LG 993.5 2018 E63 C43)

Optimization of aggregate shape, size and paste volume ratio of pervious concrete mixture for the Philippine setting / Corpuz, Ma. Patricia Leriezz J. (LG 993.5 2018 E63 C67)

Evaluation of masonry bonds using ultrasonics : the Church of Our Lady of the Assumption – Dauis, Bohol / Corsino, Reuel S. (LG 993.5 2018 E63 C677)

Environmental assessment and effectivity of green roofs of selected buildings in Metro Manila / Crisostomo, Nico C. (LG 993.5 2018 E63 C75)

Use of water treatment sludge as partial cement replacement in concrete mixtures / Cunanan, Johanna Marie M. (LG 993.5 2018 E63 C86)

Assessment of polyethylene terephthalate (PET) bottles as an alternative construction material / Dameg, Angelica Joy A. (LG 993.5 2018 E63 D36)

A study on the viability of SEM-Calaca coal bottom ash as partial fine aggregate replacement in the development of self-compacting concrete /Del Rosario, Carl Anthony M. (LG 993.5 2018 E63 D45)

Update of the UP bikeways transport plan / Dizon, Miguel Martin M. (LG 993.5 2018 E63 D59)

Assessment of the water quality of the UP Diliman Lagoon and the Academic Oval creek system / Doctolero, Dustin Dwigth M. (LG 993.5 2018 E63 D63)

Energy consumption and suitability analysis of public transport schemes using econometric modelling and MCDA : the case of UP Diliman / Dongallo, Brix P. (LG 993.5 2018 E63 D66)

Construction methods and retrofitting techniques of selected heritage structures in Cebu / Ecarma, Clarice B. (LG 993.5 2018 E63 E23)

Utilization of lightly pyrolyzed rubber in asphalt / Elman, Joshua Paul Simels D. (LG 993.5 2018 E63 E46)

Developing 3D FEM tool for modeling structure-soil-structure interaction (3SI) observed in the NUPEC field experiment / Ereño, Mary Nathalie C. (LG 993.5 2018 E63 E74)

Efficacy of Philippine granulated coal ash (GCA) for the improvement of water quality at Estero de San Miguel / Fainsan, Peter Paul C. (LG 993.5 2018 E63 F35)

Shrink-swell behavior of expansive clayey soils stabilized using fly ash-derived geopolymer / Francisco, Luigi Christian B. (LG 993.5 2018 E63 F73)

Determination of appropriate public transportation mode for UP-Philcoa route in accordance with the omnibus franchising guidelines / Frayna, Ana Marie S. (LG 993.5 2018 E63 F739)

Experimental investigation of corrugated roof sheeting in the Philippines using an air uplift chamber / Gayo, Buen Jefferson D. (LG 993.5 2018 E63 G39)

Assessment of gold mine tailings as partial sand substitute in nonloadbearing concrete hollow blocks / Germar, Anne Victoria B. (LG 993.5 2018 E63 G47)

Geotechnical characterization of geopolymerized gold-copper tailings as an embankment / Guanzon, Justine Mharzeline G. (LG 993.5 2018 E63 G83)

Assessment of organic yard waste as partial cement replacement to concrete / Guevarra, Joben C. (LG 993.5 2018 E63 G84)

Evaluation of the performance of vetiver grass (Vetiveria zizanioides) covered bioswale for urban stormwater runoff / Gumaro, Joshua Joseph C. (LG 993.5 2018 E63 G86)

Riverine flood modeling analysis of Cabanatuan City area using a 1D-2D hydraulic model / Hokson, Jose Angelo A. (LG 993.5 2018 E63 H65)

Analysis and network remodeling of a local water district in Kalibo using a hydraulic modeling program / Lachica, Daniel T. (LG 993.5 2018 E63 L33)

Assessment of the impacts and technicalities of gasification of municipal solid waste technology in UP Diliman / Laroza, Fiehl Amor R. (LG 993.5 2018 E63 L37)

Evaluation of dolomitic limestone manufactured sand as backfill material for MSE retaining walls / Llera, Maria Teresa G. (LG 993.5 2018 E63 L54)

Design and model of a domestic water distribution system for Vallehermoso, Negros Oriental / Lopez, Michael Peter Angelo (LG 993.5 2018 E63 L67)

Developing a simplified approach to computing the capacity of eccentric shear bolted steel connections at different angles of loads / Lucero, Jaydee N. (LG 993.5 2018 E63 L83)

Assessment of common ground improvement methods on the unliquefiable soil layer in mitigating liquefaction-induced settlement / Malonzo, Marvin Renzo B. (LG 993.5 2018 E63 M35)

Study on the characteristics of motorcycle taxis in Metro Manila / Mangco, Raniel Abraham A. (LG 993.5 2018 E63 M36)

Analysis and hydraulic model calibration of the water distribution system of Guinayangan, Quezon / Marjes, Jayvee R. (LG 993.5 2018 E63 M37)

lood mitigation study in Imus River / Mendoza, Raul L. (LG 993.5 2018 E63 M46)

Assessment of transportation network vehicle services from their drivers’ perspective / Mirandilla, Clinton S. (LG 993.5 2018 E63 M57)

Sensitivity analysis of earthquake characteristics in relation to changes in source parameters / Montaño, Byron P. (LG 993.5 2018 E63 M66)

Assessment of transport network vehicle services based on social aspects of sustainable transport in Metro Manila / Naral, Mathew A. (LG 993.5 2018 E63 N37)

Analysis of incompressible axisymmetric system using stabilized triangular meshed finite element method / Navarro, Ron Gabriel O. (LG 993.5 2018 E63 N38)

Investigation of progressive failures of corrugated roofing assemblies subjected to static loading using a finite element model Opiña, Gabriel M. (LG 993.5 2018 E63 O65)

Hydrologic modeling and analysis of Maragondon River for water supply / Pacumio, Eula Marie A. (LG 993.5 2018 E63 P33)

Prediction of deterioration and mean service life of different roofing systems of DepEd school buildings using a discrete Markov chain / Paniorotan, Mohamad Said Bren M. (LG 993.5 2018 E63 P36)

Analysis of spatial distribution and sources of heavy metal pollution in agricultural soils of Gapan City, Nueva Ecija / Ponte, Neil Lejan C. (LG 993.5 2018 E63 P66)

Assessment of concrete deterioration of bridge substructures situated in Pasig River / Pulbosa, Joshua Philip S. (LG 993.5 2018 E63 P85)

Strength characteristic of recycled concrete aggregate as an alternative material for rammed aggregate pier / Punzalan, Aivan Dredd B. (LG 993.5 2018 E63 P86)

Public transportation modelling of UP Diliman campus using VISSIM / Reynales, John Paul M. (LG 993.5 2018 E63 R49)

Numerical analysis of storm surge overtopping along Tacloban-Palo-Tanauan tide embankment due to Typhoon Haiyan 2013 / Rizabal, Karl Derrick S. (LG 993.5 2018 E63 R59)

Assessment of the performance of fly-ash based geopolymer concrete with plastic waste as fiber reinforcement / Rodil, Raphael Roby T. (LG 993.5 2018 E63 R63)

Effectiveness of low permeability concrete in waterproofing basement walls and concrete floor slabs / Romantico, Hannah Grace S. (LG 993.5 2018 E63 R66)

Feasibility study of implementation of parking policies in UP Diliman through comparative analysis of existing parking policies and schemes / Rosal, Gereleen Shane Q. (LG 993.5 2018 E63 R67)

Investigation of saltwater intrusion in the freshwater aquifer and possible ground subsidence near the coastal area of Dagupan City due to excessive groundwater pumping / Rosal, Maria Demi Faye Q. (LG 993.5 2018 E63 R673)

Study on perception and braking reaction time of Filipino drivers / Rosario, Noel C. (LG 993.5 2018 E63 R674)

Analysis of weir with adjustable height as a flow measuring device : a case study of La Mesa portal weirs in Quezon City / Rosete, Vince Lowel H. (LG 993.5 2018 E63 R675)

Waste glass as a partial replacement for fine aggregates in controlled low strength material (CLSM) applications / Sadural, Alaisa Joyce V. (LG 993.5 2018 E63 S23)

Trip and parking generation study of emerging food parks / Salas, Allan David G. (LG 993.5 2018 E63 S25)

Sensitivity analysis of earthquake characteristics in relation to changes in path parameters / Sales, Nikka Marie B. (LG 993.5 2018 E63 S254)

Unconfined compressive strength of coir fiber reinforced clay / San Diego, Annamarie M. (LG 993.5 2018 E63 S26)

Rapid determination of chloride permeability of concrete through normal and accelerated chloride penetration testing / Santos, Alias Jady D. (LG 993.5 2018 E63 S268)

Incorporating effects of corrosion into the greater Metro Manila Area : risk analysis project earthquake vulnerability curve for low-rise reinforced concrete structures near marine environments / Saure, Gil Bryan H. (LG 993.5 2018 E63 S28)

Tensile adhesion strength of sealants in float glass substrates when exposed to accelerated weathering / Sigui, Walleastein L. (LG 993.5 2018 E63 S54)

Barriers to the adoption of BIM (building information modeling) in the Philippine construction industry / Sobreviñas, Xeena Grace M. (LG 993.5 2018 E63 S63)

Mapping of air borne chloride concentration for corrosion assessment of selected steel bridges in the Philippines / Solidor, Carla Vernice C. (LG 993.5 2018 E63 S65)

Concrete placement labor productivity forecasting model / Soriano, Christian Alfred C. (LG 993.5 2018 E63 S67)

Correlating ultrasonic pulse velocity to the compressive strength of cement-stabilized soil / Tabilas, Danilo D. (LG 993.5 2018 E63 T33)

Estimation of the operating costs of the existing and possible alternative technologies for the UP Ikot jeepney system / Tan, Gallajahd G. (LG 993.5 2018 E63 T36)

Development of framework for the Philippine sediment quality guidelines / Taran, Charles Kevin B. (LG 993.5 2018 E63 T37)

Calibrating the cube transit model of UP Diliman / Tesoro, Carina R. (LG 993.5 2018 E63 T47)

Investigation on the resiliency of vernacular construction / Tupag, Xerxes P. (LG 993.5 2018 E63 T87)

Vertical siting of an overtopping open pier for Brgy. Palani, Balud, Masbate using Delft3D Verzosa, Frances Margarette L. (LG 993.5 2018 E63 V47)

Developing preprocessor and postprocessor modules for a three dimensional long period ground motion simulator for application to Metro Manila / Villafuerte, Victor J. M. (LG 993.5 2018 E63 V55)

Investigation of the effectiveness of different roof retrofits for existing one-storey, three-classroom school buildings against severe wind loads using vulnerability curves / Zafra, Ariel Vince C. (LG 993.5 2018 E63 Z34)

 

Institute of Civil Engineering Dissertation

Optimization of net revenue of rice production in Pampanga river basin / David, Maria Cristina V. (LG 996 2018 E63 D38)

 

Jun 28

REGULAR CIRCULATION  BOOKS


Fire safety and risk management revision guide : for the NEBOSH National Fire Certificate

Recommending faculty: Prof. Noriza Tibon, (ICE)

Authors Jonathan Backhouse and Ed Ferrett
Place of Publication Abingdon, Oxon
Date of Publication 2017
Publisher Routledge

The Fire Safety and Risk Management Revision Guide: for the NEBOSH Fire Certificate is the perfect revision aid for students preparing to take their NEBOSH National Certificate in Fire Safety and Risk Management. As well as being a handy companion volume to the Fire Protection Association textbook Fire Safety and Risk Management: for the NEBOSH National Certificate in Fire Safety and Risk Management, it will also serve as a useful aide-mémoire for those in fire safety roles. The book:

  • provides practical revision guidance and strategies for students;
  • highlights the key information for each learning outcome of the current NEBOSH syllabus;
  • gives students opportunities to test their knowledge based on NEBOSH-style questions and additional exercises;
  • provides details of publically available guidance documents that students will be able to refer to.

The revision guide is fully aligned to the current NEBOSH syllabus, providing complete coverage in bite-sized chunks, helping students to learn and memorise the most important topics. Throughout the book, the guide refers back to the Fire Safety and Risk Management textbook, helping students to consolidate their learning.


Microsoft Visual Basic 2017 : for Windows, web, and database applications : comprehensive

Recommending faculty: Dr. Francis George Cabarle, (CoE 13)

Author Corinne Hoisington
Place of Publication Boston, USA
Date of Publication [2018]
Publisher Cengage Learning

Now readers can prepare for the number one job in today’s tech sector — app development — as they learn the essentials of Microsoft Visual Basic. The step-by-step, visual approach and professional programming opportunities in MICROSOFT VISUAL BASIC 2017 FOR WINDOWS APPLICATIONS: INTRODUCTORY lay the initial groundwork for a successful degree or career in IT programming. Users gain a fundamental understanding of Windows programming for 2017. This edition’s innovative approach blends visual demonstrations of professional-quality programs with in-depth discussions of today’s most effective programming concepts and techniques. Numerous real programming assignments in each chapter let readers practice what they’ve learned as this edition equips users to program independently at their best.


Design analysis in rock mechanics, 3rd edition

Recommending faculty: Prof. Juan Fidel Calaywan, (EM 146, CE 261/268)

Author William G. Pariseau
Place of Publication London, UK
Date of Publication [2017]
Publisher CRC Press/Taylor & Francis

This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended third edition includes an additional chapter on Foundations on Jointed Rock.

Developed for a complete class in rock engineering, this volume uniquely combines the design of surface and underground rock excavations and addresses:

  •  rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures
  •  shaft and tunnel stability, ranging from naturally-supported openings to analysis and design of artificial support and reinforcement systems
  •  entries and pillars in stratified ground
  • three-dimensional caverns, with emphasis on cable bolting and backfill
  • geometry and forces of chimney caving, combination support and trough subsidence
  • rock bursts and bumps in underground excavations, with focus on dynamic phenomena and on fast and sometimes catastrophic failures.

The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for home assignment. A solutions manual is available to course instructors.

Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first year graduate students in mining, civil engineering and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.


Introduction to energy technologies for efficient power generation

Recommending faculty: Dr. Jordan Rel Orillaza, (EE 157, EE 197/198, ME 63)

Author Alexander V. Dimitrov
Place of Publication Boca Raton, FL
Date of Publication [2017]
Publisher CRC Press/Taylor & Francis Group

This book is intended to serve as a guide for discovering pathways to more efficient energy use. The first part of the book illustrates basic laws of energy conversion and principles of thermodynamics. Laws of energy conservation and direction of energy conversion are formulated in detail, and the types of thermodynamic processes are explained. Also included is the characterization of various types of real energy conversion. The second part of the book discusses types of energy conversion referred to as thermal-energy technologies. The advantages of the co-generation processes and devices operating within the Brayton direct cycle and their adaptively to household energetics are underlined.


Introduction to computing and programming in Python : a multimedia approach, Fourth edition, Global edition

Recommending faculty: Dr. Jordan Rel Orillaza, (CS 11, CS 120)

Authors Mark Guzdial and Barbara Ericson
Place of Publication England
Date of Publication 2016
Publisher Pearson Education Limited

Social Computing and Programming with Python

Introduction to Computing and Programming in Python is a uniquely researched and up-to-date volume that is widely recognized for its successful introduction to the subject of Media Computation. Emphasizing creativity, classroom interaction, and in-class programming examples, Introduction to Computing and Programming in Python takes a bold and unique approach to computation that engages students and applies the subject matter to the relevancy of digital media. The Fourth Edition teaches students to program in an effort to communicate via social computing outlets, providing a unique approach that serves the interests of a broad range of students.


Materials for civil and construction engineers, Fourth edition in SI units

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (MatE 197)

Authors Michael S. Mamlouk, John P. Zaniewski
Place of Publication England
Date of Publication 2018
Publisher Pearson Education Limited

Materials for Civil and Construction Engineers helps readers understand and select the materials involved in supporting the infrastructure needs of society–from buildings, to water and treatment distribution systems, to dams, highways, and airport pavements. By gaining a deep understanding of material behavior and the material selection process, readers can begin to understand how to create and maintain civil and construction engineering systems crucial to society.

The primary focus of the updates presented in this fourth edition was on the sustainability of materials used in civil and construction engineering. The information on sustainability was updated and expanded to include the most recent information. In addition, sections were added describing the sustainability considerations of each material. The problem set for each chapter was updated and increased to provide some fresh exercises. References were updated and increased in all chapters to provide students with additional reading on current issues related to different materials.


Transport planning & traffic safety : making cities, roads, & vehicles safer

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 46/47, CE 93, CE 141/142/143)

Editors Geetam Tiwari, Dinesh Mohan
Place of Publication Boca Raton
Date of Publication 2016
Publisher CRC Press

In recognition of the importance of road safety as a major health issue, the World Health Organization has declared 2011-2021 the Decade of Safety Action. Several countries in Europe, North America, and Asia have been successful in reducing fatalities and injuries due to road traffic crashes. However, many low-income countries continue to experience high rates of traffic fatalities and injuries.

Transport Planning and Traffic Safety: Making Cities, Roads, and Vehicles Safer offers a source book for road safety training courses as well as an introductory textbook for graduate-level courses on road safety taught in engineering institutes. It brings together the international experiences and lessons learned from countries which have been successful in reducing traffic crashes and their applicability in low-income countries. The content is based on lectures delivered during an international course on transportation planning and traffic safety, sponsored annually by the Transportation Research and Injury Prevention Programme (TRIPP) at the Indian Institute of Technology, Delhi.

The book is interdisciplinary and aimed at professionals―traffic and road engineers, vehicle designers, law enforcers, and transport planners. The authors examine trends in performance of OECD countries and highlight the public health and systems approach of traffic safety with the vulnerable road user in focus. Topics include land use (transportation planning, mobility, and safety), safety education and legislation, accident analysis, road safety research, human tolerance to injury, vehicle design, safety in construction zones, safety in urban areas, traffic calming, public transportation, safety laws and policies, and pre-hospital care of the injured.


C++ : how to program, Tenth edition

Recommending faculty: Dr. Francis George Cabarle, (CS 11, CS 150)

Authors Paul Deitel, Harvey Deitel
Place of Publication Washington
Date of Publication [2017]
Publisher U.S. Government Printing Office

C++ How to Program presents leading-edge computing technologies in a friendly manner appropriate for introductory college course sequences, based on the curriculum recommendations of two key professional organizations–the ACM and the IEEE.

The best-selling C++ How to Program is accessible to readers with little or no programming experience, yet comprehensive enough for the professional programmer. The Deitels’ signature live-code approach presents the concepts in the context of full working programs followed by sample executions. The early objects approach gets readers thinking about objects immediately–allowing them to more thoroughly master the concepts. Emphasis is placed on achieving program clarity and building well-engineered software. Interesting, entertaining, and challenging exercises encourage students to make a difference and use computers and the Internet to work on problems. To keep readers up-to-date with leading-edge computing technologies, the Tenth Edition conforms to the C++11 standard and the new C++14 standard.


Computer networking : a top-down approach, Seventh edition, Global edition

Recommending faculty: Prof. Michael Bayona EEE, (CoE 151, ECE 151, EE 275)

Authors James F. Kurose, Keith W. Ross
Place of Publication England
Date of Publication [2017]
Publisher Pearson Education Limited

Unique among computer networking texts, the Seventh Edition of the popular Computer Networking: A Top Down Approach builds on the author’s long tradition of teaching this complex subject through a layered approach in a “top-down manner.” The text works its way from the application layer down toward the physical layer, motivating students by exposing them to important concepts early in their study of networking. Focusing on the Internet and the fundamentally important issues of networking, this text provides an excellent foundation for students in computer science and electrical engineering, without requiring extensive knowledge of programming or mathematics. The Seventh Edition has been updated to reflect the most important and exciting recent advances in networking.


Reinforced concrete : mechanics and design, Seventh edition, Global edition

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 157)

Author James K. Wight
Place of Publication England
Date of Publication [2016]
Publisher Pearson Education Limited

Reinforced Concrete: Mechanics and Design uses the theory of reinforced concrete design to teach students the basic scientific and artistic principles of civil engineering. The text takes a topic often introduced at the advanced level and makes it accessible to all audiences by building a foundation with core engineering concepts. The Seventh Edition is up-to-date with the latest Building Code for Structural Concrete, giving students access to accurate information that can be applied outside of the classroom.

Students are able to apply complicated engineering concepts to real world scenarios with in-text examples and practice problems in each chapter. With explanatory features throughout, the Seventh Edition makes the reinforced concrete design a theory all engineers can learn from.


Micro and nano energy harvesting technologies

Recommending faculty: Dr. Jordan Rel Orillaza, (EE 157, EE 197)

Authors Bin Yang [and three others]
Place of Publication Boston
Date of Publication [2015]
Publisher Artech House

This is a valuable reference for all those faced with the challenging problems created by the ever-increasing interest in MEMS and nanotechnology-based energy harvesters and their applications.


Jun 27

RESERVE BOOKS


Design and construction of berm breakwaters

Recommending faculty: Dr. Eric C. Cruz, (CE 111, CE 113, CE 270, Ce 273)

Authors Jentsje van der Meer, Sigurdur Sigurdarson
Place of Publication New Jersey
Date of Publication [2017]
Publisher World Scientific

Do you want to harness the power of science, technology, and innovation to change the world? Do you want to channel your passion and education to pursue a life-long career improving the human condition?

Modern design of berm breakwaters began about thirty years ago. However, to date, there has been a lack of a well-established, formal design methodology on berm breakwaters. The authors Dr Jentsje van der Meer and Sigurdur Sigurdarson combine over 40 years of collective experience working with breakwaters to put forward a design framework in Design and Construction of Berm Breakwaters; covering the science and design practices of berm breakwater structures. The original design consisted of mass armoured berms that reshaped into statically stable S-shaped slopes. The design was adopted in Iceland and eventually led to a development with more stable structures by using available rock sizes, large rock, and more rock gradings than just “small rock (core)” and “large rock (berm)”. This more stable and only partly reshaping structure is called the Icelandic-type berm breakwater.

Written for researchers and practitioners, the volume consists of chapters on geometrical designs of the berm breakwater cross-section, including berm reshaping and wave overtopping, quarry and project management, as well as blasting and sorting techniques, designs for various wave conditions and available rock classes, and case studies of already constructed berm breakwaters.


International compendium of coastal engineering

Recommending faculty: Dr. Eric C. Cruz, (CE 111, CE 113, CE 270, Ce 273)

Editors by Shinji Sato, Masahiko Isobe
Place of Publication Singapore
Date of Publication [2015]
Publisher World Scientific

The aim of this book is to provide a comprehensive overview of Coastal Engineering from basic theory to engineering practice. The authors of this book are worldwide authorities in the field. Each chapter deals with an important topic in the field of coastal engineering. The topics are of recent deep concern all over the world motivated by the 2004 Indian Ocean Tsunami, 2005 Hurricane Katrina, 2011 Tohoku Earthquake Tsunami and other natural disasters.

For proper coastal zone management, a broad range of knowledge is necessary. This book provides a basic understanding of the theories behind the diverse natural phenomena within the coastal areas, such as waves, tsunamis and sediment transport. The book also introduces various coastal conservation technologies such as coastal structures and beach nourishment. Finally, coastal zone management practices in the USA, Europe, and Japan are introduced.

Each chapter is self-standing and readers can begin from any topic depending on their interest.


Mechanics of solids and structures, Second edition

Recommending faculty: Dr. Jaime Y. Hernandez Jr., (CE 162, CE 265, CE 297)

Author David W. A. Rees
Place of Publication London
Date of Publication [2016]
Publisher Imperial College Press

The fifteen chapters of this book are arranged in a logical progression. The text begins with the more fundamental material on stress and strain transformations with elasticity theory for plane and axially symmetric bodies, followed by a full treatment of the theories of bending and torsion. Coverage of moment distribution, shear flow, struts and energy methods precede a chapter on finite elements. Thereafter, the book presents yield and strength criteria, plasticity, collapse, creep, visco-elasticity, fatigue and fracture mechanics. Appended is material on the properties of areas, matrices and stress concentrations. Each topic is illustrated by worked examples and supported by numerous exercises drawn from the author’s teaching experience and professional institution examinations (CEI).This edition includes new material and an extended exercise section for each of the fifteen chapters, as well as three appendices. The broad text ensures its suitability for undergraduate and postgraduate courses in which the mechanics of solids and structures form a part including: mechanical, aeronautical, civil, design and materials engineering.


50 years of transportation in Singapore : achievements and challenges, Second edition

Recommending faculty: Dr. Jose Regin F. Regidor, (CE 46/47, CE 142/143, CE 240, CE 246, CE 249)

Editor Fwa Tien Fang
Place of Publication New Jersey
Date of Publication [2016]
Publisher World Scientific Publishing

This unique volume presents the achievements of the land, sea and air transport industry of Singapore in the last 50 years after Singapore gained its independence in 1965. It provides a comprehensive overview of Singapore’s progress in transportation from a typical third world system in the 1960s to one that is currently in the top league globally in all aspects of passenger and freight transportation. Singapore’s successes in land transport planning, urban traffic management, and public transport systems provide valuable experience for major cities worldwide. The emergence of the Singapore Port as the most efficient container port in the world is another success story that inspires both established and up-and-coming port operators alike. The ambitious goal of Singapore to develop itself into a maritime knowledge hub of the future is a bold and exciting undertaking catching worldwide attention. In air transport, Singapore is well known for its efficiency as a major regional hub.This book examines in detail the important milestones and background developments that have led to the highly advanced state of transportation systems in the land, sea and air transport of Singapore today. Each chapter is written by professionals who are themselves part of the success stories presented. The chapter authors are specially invited to provide a professional account of the topics of their expertise. The authors have been able to draw on extensive amounts of published and unpublished documents and reports to present a comprehensive picture for the subject of interest in each chapter. As a whole, the book offers a hollistic and informative professional reference book on the major happenings and achievements of Singapore in the transportation sector.


Principles of geotechnical engineering, Ninth edition, SI.

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 162/163, CE 226, CE 264/266)

Authors Braja M. Das, Khaled Sobhan
Place of Publication Boston, USA
Date of Publication 2018
Publisher Cengage Learning

Gain a solid understanding of soil mechanics and soil properties as Das and Sobhan’s PRINCIPLES OF GEOTECHNICAL ENGINEERING, SI EDITION, 9E introduces these topics together with coverage of field practices and basic civil engineering procedures. This book provides the important foundation that you need for future studies in your design-oriented courses and in professional practice. This book ensures a practical approach by incorporating a wealth of comprehensive discussions and detailed explanations. PRINCIPLES OF GEOTECHNICAL ENGINEERING, SI EDITION, 9E provides more figures and worked-out problems than any other book for the course to further ensure your understanding.


Rockbolting : principles and applications

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 261, CE 268) & Prof. JF Calaywan, (EM 146)

Author Charlie Chunlin Li
Place of Publication Kidlington, Oxford
Date of Publication [2017]
Publisher Butterworth-Heinemann

Rockbolting: Principles and Applications brings current theoretical and practical developments in the most widely used support device for underground rock excavations. Today, one cannot find any rock excavation project that does not use rockbolts for rock support. The worldwide annual assumption of rockbolts is in the billions, with pieces applied to mines, tunnels and other types of geotechnical projects for rock and soil reinforcement. The text is based on over 25 years of experience of the author both as academic and practitioner.

The book introduces the principles and background concepts of rock support, and then offers a comprehensive overview of the mechanics of rockbolting, as well as current rock bolt types such as mechanical, grouted, self-drilling, grouted cables, frictional and yield rockbolts. Installation and performance assessment are covered next including load-displacement curves and energy-absorption capacities.

Two chapters on design and quality control, respectively, cover failure mechanics, the selection process and the connections with other supporting devices. On quality control, the author explains the usual tests and displacement measurements. The final chapter brings current case studies that combine the concepts presented in the whole book. The book is a professional reference for engineers in the mining and geotechnical industries and can be used as research material for academics in rock mechanics and stability studies.

  • Covers the standard and most recent types of rockbolts
  • Includes information on rockbolting in high stress rock
  • Presents case studies that introduce practical applications in several conditions

Transport planning & traffic safety : making cities, roads, & vehicles safer

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 46/47, CE 93, CE 141/142/143)

Editors Geetam Tiwari, Dinesh Mohan
Place of Publication Boca Raton
Date of Publication 2016
Publisher CRC Press

In recognition of the importance of road safety as a major health issue, the World Health Organization has declared 2011-2021 the Decade of Safety Action. Several countries in Europe, North America, and Asia have been successful in reducing fatalities and injuries due to road traffic crashes. However, many low-income countries continue to experience high rates of traffic fatalities and injuries.

Transport Planning and Traffic Safety: Making Cities, Roads, and Vehicles Safer offers a source book for road safety training courses as well as an introductory textbook for graduate-level courses on road safety taught in engineering institutes. It brings together the international experiences and lessons learned from countries which have been successful in reducing traffic crashes and their applicability in low-income countries. The content is based on lectures delivered during an international course on transportation planning and traffic safety, sponsored annually by the Transportation Research and Injury Prevention Programme (TRIPP) at the Indian Institute of Technology, Delhi.

The book is interdisciplinary and aimed at professionals―traffic and road engineers, vehicle designers, law enforcers, and transport planners. The authors examine trends in performance of OECD countries and highlight the public health and systems approach of traffic safety with the vulnerable road user in focus. Topics include land use (transportation planning, mobility, and safety), safety education and legislation, accident analysis, road safety research, human tolerance to injury, vehicle design, safety in construction zones, safety in urban areas, traffic calming, public transportation, safety laws and policies, and pre-hospital care of the injured.


C++ : how to program, Tenth edition

Recommending faculty: Dr. Francis George Cabarle, (CS 11, CS 150)

Authors Paul Deitel, Harvey Deitel
Place of Publication Washington
Date of Publication [2017]
Publisher U.S. Government Printing Office

C++ How to Program presents leading-edge computing technologies in a friendly manner appropriate for introductory college course sequences, based on the curriculum recommendations of two key professional organizations–the ACM and the IEEE.

The best-selling C++ How to Program is accessible to readers with little or no programming experience, yet comprehensive enough for the professional programmer. The Deitels’ signature live-code approach presents the concepts in the context of full working programs followed by sample executions. The early objects approach gets readers thinking about objects immediately–allowing them to more thoroughly master the concepts. Emphasis is placed on achieving program clarity and building well-engineered software. Interesting, entertaining, and challenging exercises encourage students to make a difference and use computers and the Internet to work on problems. To keep readers up-to-date with leading-edge computing technologies, the Tenth Edition conforms to the C++11 standard and the new C++14 standard.


Computer networking : a top-down approach, Seventh edition, Global edition

Recommending faculty: Prof. Michael Bayona EEE, (CoE 151, ECE 151, EE 275)

Authors James F. Kurose, Keith W. Ross
Place of Publication England
Date of Publication [2017]
Publisher Pearson Education Limited

Unique among computer networking texts, the Seventh Edition of the popular Computer Networking: A Top Down Approach builds on the author’s long tradition of teaching this complex subject through a layered approach in a “top-down manner.” The text works its way from the application layer down toward the physical layer, motivating students by exposing them to important concepts early in their study of networking. Focusing on the Internet and the fundamentally important issues of networking, this text provides an excellent foundation for students in computer science and electrical engineering, without requiring extensive knowledge of programming or mathematics. The Seventh Edition has been updated to reflect the most important and exciting recent advances in networking.


Reinforced concrete : mechanics and design, Seventh edition, Global edition

Recommending faculty: Prof. Lestelle V. Torio-Kaimo, (CE 157)

Author James K. Wight
Place of Publication England
Date of Publication [2016]
Publisher Pearson Education Limited

Reinforced Concrete: Mechanics and Design uses the theory of reinforced concrete design to teach students the basic scientific and artistic principles of civil engineering. The text takes a topic often introduced at the advanced level and makes it accessible to all audiences by building a foundation with core engineering concepts. The Seventh Edition is up-to-date with the latest Building Code for Structural Concrete, giving students access to accurate information that can be applied outside of the classroom.

Students are able to apply complicated engineering concepts to real world scenarios with in-text examples and practice problems in each chapter. With explanatory features throughout, the Seventh Edition makes the reinforced concrete design a theory all engineers can learn from.


Micro and nano energy harvesting technologies

Recommending faculty: Dr. Jordan Rel Orillaza, (EE 157, EE 197)

Authors Bin Yang [and three others]
Place of Publication Boston
Date of Publication [2015]
Publisher Artech House

This is a valuable reference for all those faced with the challenging problems created by the ever-increasing interest in MEMS and nanotechnology-based energy harvesters and their applications.


Jun 19

Time

Place of Publication New York
Date of Publication Vol.193, no.6-7 : February 18 & 25, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.8 : March 4, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.9 : March 11, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.10 : March 18, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.11 : March 25, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.12 : April 1, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.13 : April 8, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.14 : April 15, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.15 : April 22, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.16-17 : April 29/ May 6, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.18 : May 13, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.19 : May 20, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.20 : May 27, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.21-22 : June 3/June 10, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.23 : June 17, 2019
Publisher Time Inc.


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 114, no. 668 : October 2018
Publisher Reader’s Digest Association Far East


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 114, no. 669 : November 2018
Publisher Reader’s Digest Association Far East


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 114, no. 670 : December 2018
Publisher Reader’s Digest Association Far East


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 115, no. 671 : January 2019
Publisher Reader’s Digest Association Far East


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 115, no. 672 : February 2019
Publisher Reader’s Digest Association Far East


Reader’s Digest

Place of Publication Shaukiwan, Hong Kong
Date of Publication Vol. 115, no. 673 : March 2019
Publisher Reader’s Digest Association Far East

Feb 12

Time

Place of Publication New York
Date of Publication Vol.193, no.2 : January 21, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.3 : January 28, 2019
Publisher Time Inc.


Time

Place of Publication New York
Date of Publication Vol.193, no.4-5 : February 4/ February 11, 2019
Publisher Time Inc.


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.194 : January 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.195 : February 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.196 : March 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.197 : April 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.198 : May 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.199 : June 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.200 : July 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.201 : August 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.202 : September 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.203 : October 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.204 : November 2017
Publisher Linux Media Ltd


Linux Magazine

Place of Publication Manchester, England
Date of Publication No.205 : December 2017
Publisher Linux Media Ltd


« Previous Entries